AirLive AP60 - Manual (Page 46)

4. Wireless Settings
AirLive AP60 User’s Manual 40
4.2.16 Access Control
Wireless Settings -> Access Control
The AP60 allows you to define a list of MAC addresses that are allowed or denied to
access the wireless network. This function is available only for Access Point and AP
Router modes. This function is available only for Access Point and Gateway modes.
Disable: When selected, no MAC address filtering will be performed.
Allow list: When selected, data traffic from only the specified devices in the
table will be allowed in the network.
Deny list: When selected, data traffic from the devices specified in the table
will be denied/discarded by the network.