AirLive AP60 - Manual (Page 37)

4. Wireless Settings
79
AirLive AP60 User’s Manual
4.2.5 Signal Survey
Operation Mode -> Setup -> Site Survey -> Signal Survey
The Signal Survey will continuously display the SIGNAL STRENGTH value of the selected
SSID for antenna alignment purpose. To use Signal Survey function, please enter the
“Site Survey” function first; please refer to the instruction in the above section. Once you
select the ESSID and click on the “Signal Survey” button, the following screen will appear.
BSSID: This is the remote AP’s MAC address.
Channel: The current scanned channel
Signal Strength: This is signal strength number in percentage in 0 to 100 scale.
The higher the number, the better signal.
4.2.6 Channel Width
Wireless Settings -> Channel Width
You can choose 20MHz or 20/40MHz channel width. Choose 20MHz for compliance with
laws in some countries. 40MHz offers faster performance than 20MHz
Click here to
select SSID for
Association or
Signal Survey. To connect with the
selected SSID. This
function is available
only in Client, WISP
Router, and Repeater
modes only. For antenna
alignment. It will
display and update
the Signal Strength
continuously.