2 prepare your pc – AirLive AP60 User Manual

Page 24

3. Configuring the AP60

AirLive AP60 User’s Manual

3.2 Prepare your PC

The AP60 can be managed remotely by a PC through either the wired or wireless network.
The default IP address of the AP60 is

192.168.100.252 with a subnet mask of

255.255.255.0. This means the IP address of the PC should be in the same subnet of the

AP60.

To prepare your PC for management with the AP60, please do the following:

1. Connect your PC directly to the LAN port of AP60

2. Set your PC’s IP address manually to 192.168.100.100 (or other address in the same

subnet)

You are ready now to configure the AP60 using your PC.