AirLive AP60 - Manual (Page 64)

6. System Configurations
AirLive AP60 User’s Manual 58
DHCP Client Range: You can define the IP pool from which the DHCP clients can
get IP address.. Click on “Show Clients” to see the current DHCP client table.
DHCP Release Time: You can define how long the AP60 will reserve IP
address for a particular PC or Device here.
6.2.2 Set Static DHCP
If you want to lock IP address to a MAC address, you should add DHCP clients to the
“Static Lease Client”. Up to 40 entries can be entered. Below is the procedure for adding
an entry:
1. Enter the MAC address of the device
2. Enter the IP address of the device
3. Click on the “Add” button
6.2.3 Domain Name
You can enter the network area name here.
6.2.4 802.11d Spanning Tree
Select Disabled or Enabled form the pull-down list.