AirLive AP60 - Manual (Page 68)

6. System Configurations
AirLive AP60 User’s Manual 62
Watch Interval: means: "How often the AP60 will PING". For example, it will PING
once every "1" minute.
Watch Host: This is the IP address for which the Watchdog will ping.
6.7 Firmware Upgrade
System Configuration -> Firmware Upgrade
You can upgrade the firmware of your AP60 (the software that controls your AP60’s
operation). Normally, this is done when a new version of firmware offers new features that
you want, or solves problems that you have encountered with the current version.
Upgrade Firmware:
To update the AP60 firmware, first download the firmware from AirLive web site to your
local disk. Then from the above screen enter the path and filename of the firmware
file (or click Browse to locate the firmware file). Next, Click the Upgrade button to
start.
Please make sure to check the “Keep Settings” box if you want the settings to be
kept after firmware upgrade.
The new firmware will be loaded to your AP60. After a message appears telling you
that the operation is completed, you need to reset the system to have the new firmware
take effect.