AirLive AP60 - Manual (Page 63)

6. System Configurations
79
AirLive AP60 User’s Manual
6.2 LAN Interface Setup
System Configurations>> LAN Interface Setup
This menu is where you can configuration all the aspect about LAN interface including IP
address, DHCP server settings etc.
6.2.1 DHCP Settings
DHCP Service: You can enable or disable DHCP server here.
Disable: Disable DHCP server
Client: The LAN interface will get IP address from DHCP server
Server (default): The AP60 will act as DHCP server to provide IP
addresses to the clients on the LAN/Wireless interface. By default, the
DHCP server is on.
DCHP Relay Agent: This function should be chosen in Universal
Repeater mode in order to assign IP address from remote DHCP server.
Device IP
Settings
DHCP
Settings