5 wps settings – AirLive Air3G User Manual

Page 82

7. Client Mode

AirLive Air3G User’s Manual

Channel Width: You can choose 20MHz or 20/40MHz channel width. Choose

20MHz for compliance with laws in some countries. 40MHz offers faster performance
than 20MHz

Guard Interval: Guard interval is placed at the beginning of each transmission. It is

used to reduce the interference effect of multi-path transmissions. The use of long
Guard Interval may perform better in interference or multipath environment. However,
it can reduce the performance.

MCS (Modulation and Code Scheme): MCS level for the 11n mode. It is

recommended to leave it at Auto.

7.2.5 WPS Settings

Example 1: Using WPS hardware button

Please push WPS button directly on the back of the device. The “WPS” LED flash will light
and the Air3G will start to survey the AP’s WPS signal in the current environment.

Within two minutes, please push WPS button on your AP device, the connection will
automatic successfully.

Example 2: WPS using PIN

Please login Air3G’s Web UI. Select Wireless Setting

Æ change to Client mode Æ Client

WPS Setting.