AirLive Air3G - Manual (Page 27)

3. Configuring the Air3G
AirLive Air3G User’s Manual 20
3.6 Change Regulatory Domain
The Regulatory Domain settings will decide what channels and output power are available
for your Air3G. You must choose the correct Regulatory Domain for your country. Using
the incorrect Regulatory Domain might be illegal. Please check the summary table below.
If you are unsure about what Regulatory Domain to use, please use “ETSI(Europe)” and
restrict yourself to use only Channel 1 to 11.
Regulatory Domain Table
Domain Channels Maximum Tx Output
Power Countries
ETSI (Europe) 1~13 20dBm EU countries
FCC(United States) 1~11 23dBm The United States and other
countries that use U.S.A
regulation for WiFi
South America
(11ch) 1~11 30dBm South American countries that
follow channels of FCC domain.
South America
(14ch) 1~14 30dBm South American countries that
allow use of all channels in
2.4GHz.
The default Regulatory domain is ETSI(Europe). If you need to change the Regulatory
Domain, please go to “Wireless Settings”->”Regulatory Domain” menu. After changing
the Regulatory Domain, the device will reboot to the new settings.
3.7 WPS (WiFi Protected Setup)
WPS is a system that simplifies the process to established wireless security. There are two
ways to configure WPS connection:
1. PBC (Push Button Communication) using hardware or software:
Push WPS buttons on both AP and Client site, the WPS connection will connect
automatically. You can find Air3G’s WPS Push button on the back of the router.