2 lan interface setup, 1 dhcp settings – AirLive Air3G User Manual

Page 59

5. System Configuration and Status Menu

AirLive Air3G User’s Manual

5.2 LAN Interface Setup

System Configuration>> LAN Interface Setup

This menu is where you can configure all the aspect about LAN interface including IP
address, DHCP server settings..etc.

5.2.1 DHCP Settings

DHCP Service: You can enable or disable DHCP server here.

z Disable: Disable DHCP server. By default, the DHCP server is OFF

in AP, Client, and WDS Bridge mode.

z Server: The Air3G will act as DHCP server to provide IP addresses to

the clients on the LAN/Wireless interface. By default, the DHCP server
is on in 3G router mode.

DHCP Client Range: You can define the IP pool from which the DHCP clients can

get IP address.. Click on “Show Clients” to see the current DHCP client table.

Lease Time: You can define how long the Air3G will reserve IP address for a

Device IP
Settings

DHCP
Settings