AirLive Air3G User Manual
Page 36
4. Configuration: 3G Router Mode
29
AirLive Air3G User’s Manual
3G Configuration: Click here to configure the 3G function
WAN Configuration: Click here to Configure WAN port related function
Enable Auto Switch Backup: Check this box to enable the Air3G to switch from
secondary connection back to primary connection if the primary connection is back
online. For example, if you choose “WAN with 3G Backup” as Internet Source.
When this option is enabled, in the event of WAN failure and switched to 3G
connection, the Air3G will monitor whether WAN is back online. If yes, then it will
switch back to the WAN connection.
Please note that during the connection switch,
the Air3G will reboot. It might cause temporarily service disruption.
For more
information about this subject.
Please read section 4.4 in this chapter.
Enable UPnP: Enable universal plug and play
Enable Response to PING: Please enable this if you want Air3G to response to
remote PING command
Enable Remote Management: Enable this option for remote access of the web
management interface.
Enable VPN Pass Through: If you have VPN servers in your local area network, you
need to turn on the VPN pass through to allow remote access to the VPN networks.
3G Configurations
The 3G configuration features a setup wizard that allows you to select your country and
service provider. If your country is not on the list or if the setup wizard information is