Ap and 3g router modes, 1 ap and 3g router modes – AirLive Air3G User Manual

Page 28

3. Configuring the Air3G

AirLive Air3G User’s Manual

2. PIN (Personal Information Number) Enrollee and Registrar:

WPS Registrar site should be entered the PIN Code from Enrollee site, the WPS
connection will connect automatically.

It is recommended to use the first option as it is much simpler to configure.

3.7.1 AP and 3G Router Modes

Example1: Using Hardware Push button

Please push WPS button directly on the back of the Air3G. The “WPS” LED flash will light
and the Air3G will start to survey the client’s WPS signal in the current environment. Please
be noticed that, within two minutes, you have to turn on the utility of your wireless network
card and click PBC to connect automatically.

If you also have a hardware WPS button on your wireless card, you can push the button
immediately now. If not, you can usually find the WPS PBC function in the wireless utility.
Below is an example using AirLive WN-360USB wireless network card to connect with
Air3G.