AirLive Air3G - Manual (Page 81)

7. Client Mode
AirLive Air3G User’s Manual 74
You can now select the SSID you want to connect with, then press the “Connect” button. If
encryption key is required, the AP will prompt you to enter the encryption information.
7.2.4 Advance Settings
„ BG Protection: The 802.11g standard includes a protection mechanism to ensure
mixed 802.11b and 802.11g operation. If there is no such kind of mechanism exists,
the two kinds of standards may mutually interfere and decrease network’s
performance..
„ AckTimeOut: When a packet is sent out from one wireless station to the other, it will
waits for an Acknowledgement frame from the remote station. The station will only
wait for a certain amount of time, this time is called the ACK timeout.
In most
conditions, please do not change the Tx and Rx Acktimeout value. The Air3G’s default
value is correct in most cases.
„ Tx Burst: These are the scheme used for improving the performance of the data
transmission in 11n and Turbo modes. It is recommended to keep the settings on.