ADS-TEC VMT7010/7012/7015 - Manual (Page 7)

VMT7010/VMT7012/VMT7015 6
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
1.7 EC-Directives and Standards
EC-Directives
This device is compliant with the provisions and safety objectives of the following
EU directives:

1999/5/EC, R&TTE-Directive (RTTE)

2004/108/EC, EMV-Directive(EMC)
Standards
For verification and compliance with these guidelines, the following
harmonized standards have been applied:

EN 55022

EN 55024

EN 61000-6-2

EN 61000-6-4

EN 60950-1
For verification against environmental influences, the following standards are
complied:

EN 60068-2-6 (vibration test, sinusoidal)

EN 60068-2-27 (shock test)
Information:
For full compliance with the EMC legislation , the connected components and
the cable connections must also meet these requirements. Therefore
shielded data cables with shielded plugs have to be used and installed
according to the instructions in the operating manual.
Information:
By using the EC conformity declaration in this document, you can find
detailed information about the standards applicable to this device.