ADS-TEC VMT7010/7012/7015 - Manual (Page 6)

VMT7010/VMT7012/VMT7015 5
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
1.6 Environmental conditions
The device can be put into operation and used under the following conditions. Failure to observe any
one of these conditions will invalidate the warranty. ads-tec cannot be held liable for any damages
arising from improper use and handling.

Temperature for devices without a heater
in operation* -20 ... 55°C
for storage -30 ... 60°C

Temperature for devices including a heater
in operation* -30 ... 55°C
for storage -30 ... 60°C
 Humidity
In operation 10 … 85% without condensate
For storage 10 … 85% without condensate
This unit is compliant to the DIN EN 60068-2-29 (shock and bump) testing
specification
 Vibration and shock resistance
EN 60721-3-5 (06.1998), class 5M2 for HDD version, class 5M3 (terrestrial
vehicles) for SSD version, 5 hours of noise-type vibrations; 3.6 g rms and 30 g
peak value
Additionally applies MIL-STD 810F (01.2000), annex C, figure 514.5C
(US highway truck transportation)
*(depending on mass storage device)