ADS-TEC VMT7010/7012/7015 User Manual

Page 19

Text mode
Original mode

VMT7010/VMT7012/VMT7015

Information:

The power supply is realized by means of a transformer. The primary side of the
transformer, which is connected to mains, is electrically insulated from the
secondary side of the transformer, which provides the internal power supply.
Functional EMC protection is provided only if the PE-pin of the power supply plug
is connected to earth.
When mounting on mobile vehicles, a functional earth must be established for this
purpose.

If the device is to be earthed, this can be performed at the appropriate point in the service slot:

How to proceed if PE is used:

You must adhere to the following figure in order to ensure a correct installation of the PE system.

Fig. 7:

Pos : 18 /D atent ec hni k/I nbetri ebnahme/R eihenfolg e der Inbetriebnahme/R ei henf olge der I nbetriebnahme f ür VMT 60xx- Seri e @ 1\ mod_1222073159179_6. doc @ 4100 @