2N VoiceBlue Next v3.7 - Manual (Page 53)

53
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Generate virtual ring tone – enable/disable generation of the virtual ringing tone
to the VoIP interface.
Call length counting: select whether the call should be counted in seconds or
minutes.
After call relax delay – set the time between the end of the current call and start
of the next call via one and the same GSM/UMTS module. The recommended
value for heavy–traffic installations is 2 seconds!
Add random time – use this auxiliary parameter to add random time in
seconds. Thus, the resultant time is the sum of the two above mentioned
parameters.
Network settings
BTS lock – identify the BTS to which the GSM modules shall log in. Restart the
selected GSM modules to execute the changes.
Network operator code (MCC+MNC) – set the local mobile network provider code
manually. If you do not enter a value, the provider will be selected automatically.
Network register attempts – počet pokusů pro registaraci do sítě v případě, že síť
odmítne registraci SIM odpovědí +CREG:3.
Network register delay (0-3600)[s] – zpoždění pro další registraci. Doba po
kterou se čeká, zda síť nepošle další odpověď po odmítnutí odpovědí +CREG:3.
Enable USIM and SIM Application Toolkit – zapíná/vypíná služby USIM a SIM
Application Toolkit pro moduly Telit HE/GE 910.
Disconnect Call
Set the rules for automatic disconnection of outgoing calls to a wireless network.
SIM limit exceeded – automatic call disconnection when the active SIM card call
limit is exceeded.
Time limit exceeded – automatic call disconnection when the active SIM card
time of use is exhausted.
No ALERTING before CONNECT – automatic call disconnection when the gateway
receives the call connect message without alerting.
Send CLIP from VoIP to GSM/UMTS
Transfer CLIP to GSM/UMTS – enable/disable the function.
Separating char – the CDN/CLIP separating character.
Modify (" removes one digit) – you can change the CLIP. The "– character is used
for deleting one char from the left.
Caution
The BTS lock service work with specific GSM modules only (Q55, Q24,
GE910, HE910)!
If you set a wrong BTS lock, the selected GSM module(s) will not log in to
GSM.
Caution
The service must be supported by the Send CLIP from VoIP to GSM
GSM/UMTS provider. If not, the provider's network may reject the call!