Home screen, Software, Advanced – 2N Indoor Touch User guide v1.2 User Manual

Page 22

Home Screen

This section helps you change the position and content of the introductory screen tiles
and the configuration access password (click Set password for access to settings).

Software

Allow installation of apps from unknown sources – enable/disable
installation of other applications from an SD card or the Internet.
Uninstall application – uninstall the user installed applications.

Advanced

Force sleep if device temperature is above – enable the stand-by mode
whenever the device temperature exceeds the defined internal temperature
limit.*
Reboot – restart the device.
Factory reset – reset the device factory values.

Caution

By allowing other application installations you may cause system
instability due to an application error! Click Factory reset to delete such
applications if necessary!

Caution

We do not recommend you to change the preset device temperature limit
to avoid device life impairment or system instability! In case the device
keeps exceeding the temperature limit, please check the installation
conditions!