Networks, Local settings, Audio – 2N Indoor Touch User guide v1.2 User Manual
Page 21: Display
21
Networks
LAN – set the fixed Ethernet interface:
Enable Ethernet – activate/deactivate the adapter.
DHCP – enable/disable the DHCP client.
IP address – IPv4 address if the DHCP client is off.
IP mask – IPv4 mask if the DHCP client is off.
IP gateway – gateway IPv4 address if the DHCP client is off.
IP DNS – DNS server IPv4 address if the DHCP client is off.
Wi-Fi (according to the device type):
Enable Wi-Fi –
the adapter.
activate/deactivate
DHCP – enable/disable the DHCP client.
IP address – IPv4 address if the DHCP client is off.
IP mask – IPv4 mask if the DHCP client is off.
IP gateway – gateway IPv4 address if the DHCP client is off.
IP DNS – DNS server IPv4 address if the DHCP client is off.
Click Apply settings to save the current adapter settings.
Click Select network to select the WiFi AP network to which the device shall be
connected.
Local Settings
Open keyboard settings – set the system keypad.
Open language settings – set the system language.
Launcher language – set the introductory and setting screen language.
Open data and time settings – set the system date/time.
Weather – set the installation site for weather forecast.
Audio
Set the device volume level.
Display
Brightness – set the display brightness level.
Turn display off after – set the timeout for automatic turn-off in case of
inactivity.
Notification LED
White LED when display is turned off – the white LED lights up
automatically after the LCD display turn-off to indicate the stand-by mode.
Enable notifications – enable LED notifications of selected events (missed
calls, e.g.) in the stand-by mode.
Tip
The weather forecast location includes the local place (town) and country
(abbreviated). If you enter an incorrect format, no weather forecast will
be displayed. Make sure while setting the location that the device is
connected to the Internet. Refer to
for more
details.