2N Omega series - Configuration Tool manual v1.10 - Manual (Page 34)

34
2.2. Internal lines
2.2.1. Numbering
This item offers a list of internal subscribers to the PBX. Here the individual ports
are assigned a subscriber number and a name. The name is allowed to up to 14
characters, the numbering is 4 digits at most. Pay attention that no collision with the
numbering of services arises.
In the DDI column enter the DDI number used when phoning an internal line during
DISA, DDI, if it is not set up otherwise in the ringing table.
Select the user language in the Language column to display the key system
phone menus, line names and personal quick dialling labels. Select one of up to 4
languages as preset in the Global data/Localisation menu.
The Prefix CLIP column represents the transition sign to the VTS for internal
lines that identify an incoming call and for system telephones with at least 05.12
firmware. It enables this equipment to accept call back directly from a list of
rejected calls. It can contain up to 4 characters.
The column Prefix CLIP private represents the transition sign to a private
network (an external line denoted as a private one) for internal lines that identify an
incoming call and for system telephones with at least 05.12 firmware. It enables this
equipment to accept call back directly from a list of rejected calls. It can contain up
to 4 characters.
2.2.2. Access to external lines
2.2.2.1. Allocating external lines