Echo 76824 Owners Manual v.1 - Manual (Page 18)

PN 18280-00 R121505 16
Section
The items listed in the service and maintenance schedule are to be checked, and if necessary, corrective action taken. This schedule
is designed for units operating under normal conditions. If the unit is operating in adverse or severe usage conditions it may be
necessary for the items to be checked and serviced more frequently.
See engine owners manual for further maintenance and troubleshooting information.
SERVICE AND MAINTENANCE SCHEDULE
FREQUENCY
COMPONENT
MAINTENANCE
REQUIRED
BEFORE
EACH USE
EVERY
8
HRS
EVERY
25
HRS
EVERY
50
HRS
EVERY
100 HRS
EVERY
200 HRS
EVERY
500 HRS
EVERY
1500 HRS
NUTS & BOLTS CHECK TORQUE
CHIPPER BLADES
CHECK, SHARPEN
IF NEEDED 1
ENTIRE MACHINE CLEAN
ROTOR BEARING GREASE
BELTS CHECK
1 It is a good sign that your chipper blades need sharpening when material stops self feeding.
Service & Maintenance
5.1 MAINTENANCE SCHEDULE
5.2 DISK LOCK
Follow the steps below to install the disklock:
Remove the plastic rotor shaft cover under the chipper chute.
There is a hole in the rotor jack shaft and a matching hole in
the bracket mounted to the rotor bearing frontside.
Install a punch or screwdriver into the rotor shaft and bracket
to lock the disk in place.
1.
2.
DISK ASSEMBLY
DISK LOCK HOLE
ROTOR SHAFT COVER
MATCHING HOLE
Figure 5.1 - Disk Lock
The disk assembly has a lock mechanism. When working on
the disk assembly, use the lock mechanism at all times.
WARNING
5