Echo 76824 Owners Manual v.1 - Manual (Page 17)

PN 18280-00 R121505 15
OPERATION
4.5 HYDRAULIC FEED
OPERATING
Start the chipper engine. Bring the chipper up to operating
speed (Section 4.1).
Lower the engagement arm to engage the drive belt.
Engage the hydraulic feed by moving the control arm as
shown in Figure 4.2.
If the chipper jams, reverse the feed by moving the control
arm in the reverse direction. Remove the branch and rotate
it before reinserting into the chute again.
1.
2.
3.
4.
Hydraulic Pump
(mounted on engine mount)
Hydraulic Fluid
Reservoir
Hydraulic
Motor
Roller Assembly
Figure 4.1 - Hydraulic Feed Component Locations
Hydraulic Filter
Figure 4.2 - Control Arm Operation