IOGear GWHDMS52MB - Manual (Page 5)

5
• Never use this product nearby an
aircraft or medical facility. It can cause
interference or undesirable effect on the
operation result
• Use of this product in the following
locations may result in abnormal video and
audio output (noise, blocked image... etc,).
1. Product installed in the walls made of
concrete
2. Product is situated near the refrigerator
or metal fitment
3. A cluttered room where the wireless
signals may be blocked
• This product has been tested and
manufactured to comply with each
country’s safety rules. However, there is
no guarantee that interference will not
occur in some installation scenario. If
the interference happens, increase the
distance between the transmitter and
receiver
• GWHDMS52MB may interfere 5GHz
wireless devices, such as routers or other
wireless devices. Therefore, if you have an
802.11n/ac router, configure it to the 2.4
GHz band rather than the 5GHz band
• Optimal range between GWHDMS52MB
transmitter and receiver is between 2 and
20 meters within line of sight
Special Notice System Warning
FEDERAL COMMUNICATIONS
COMMISSION INTERFERENCE
STATEMENT
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there
is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.