IOGear GWHDMS52MB - Manual (Page 24)

TX
ON INFO OFF
H1 H2
H3 COMP H4
H1 H2
H3 COMP H4
EDID1 EDID2
EDID3 IR
RX
OK
24
Naming the Input Source Devices
1. Press and hold the
SOURCE button on the Transmitter for 4~5 seconds. The source
naming On Screen Display will appear.
2. To name the current source input,
point the remote control towards the
Transmitter and use the
UP and DOWN
buttons to change the alphanumeric
character; use the
LEFT and RIGHT
buttons to move the cursor.
3. After entering the desired name for
the source input, press the OK on the
remote control or press the SOURCE
button on the Transmitter to confirm and
save the new source name.
4. The new source name will now be
displayed on both the Transmitter and
Receiver when selected.
Moves the
cursor left or
right
Changes letters
and numbers
CHANGE SOURCE NAME
NAME= HDMI1