IOGear GHSW8242 Manual - Manual (Page 7)

6
3
4
2
1
5
8 7
9
7
1. Up / Down / Left / Right Buttons
Press the Up / Down / Left / Right button
to cycle through the OSD menu/selection.
2. OK
Press to confirm the selection on the OSD
screen.
3. On
Press to power on the GHSW8242.
4. Off
Press this to power off the GHSW8242.
5. Port Selection Buttons1~4
Press to select content from the desired
port
6. Menu
Press to enable / disable the OSD menu.
7. Info Button
Press to display information about the
source device on the upper left side of
the screen. The information can include:
Source port number; Source port number
+ Source Type; or turned off.
8. ARC
Press to Enable / Disable ARC function.
See ARC Commands, page 11.
9. HDMI Mute
Press to Enable / Disable audio for the
output HDMI port. See Mute Commands,
page 13.
IR Remote Control