beautypg.com

System setting – IOGear GHSW8242 Manual User Manual

Page 20

background image

20

System Setting
Use this screen to configure the GHSW8242 system settings.

1. Use the drop-down menu to set up which EDID mode the GHSW8242 uses. See EDID

Commands, page 19 for more details.

2. Use the drop-down menu to select how the video source’s CEC is applied. See CEC

Commands, page 20 for more details.

3. Set this to On to have the GHSW8242 return to default settings when it is reset. Otherwise,

select Off.

4. This read-only field shows the firmware version of the GHSW8242.

See also other documents in the category IOGear Computer Accessories: