IOGear GHSW8242 Manual - Manual (Page 4)

4
System Requirements
The GHSW8242, 4x2-Port HD Switch Splitter package consists of:
• 1 GHSW8242 4x2 Port HD Switch Splitter
• 1 IR Remote Control
• 1 IR Receiver Cable
• 1 Foot Kit
• 1 Power Adapter
• 1 Quick Start Guide
• 1 User Manual
• 1 Rack Mount Kit
Package Contents
The following equipment is required to complete an GHSW8242 installation:
Source Device
HDMI Type A output connector(s)
Note: A DVI/HDMI adapter is required when connecting a DVI source device.
Display Device
Up to 2 display devices or receivers with an HDMI Type A input connector
Cables
6 HDMI cables
Note:
1. No cables are included in this package. We strongly recommend that you purchase high-
quality cables of appropriate length since this will affect the quality of the audio and video
display.
2. If you wish to utilize the GHSW8242’s high-end serial controller function, you will also need
to purchase an appropriate RS-232 cable. See Installing the RS-232 Controller, page 10.