JLG X500AJ Operator Manual - Manual (Page 27)

SECTION 2 - PREPARATION AND INSPECTION
3121636 – JLG Lift – 2-3
Table 2-1.Inspection and Maintenance Table
Type Frequency
Primary
Responsibility
Service
Qualification
Reference
Pre-Start Inspection Before using each day; or
whenever there’s an Operator change. User or Operator User or Operator Operation and Safety Manual
Pre-Delivery Inspection (See
Note) Before each sale, lease, or rental delivery. Owner, Dealer, or
User Qualified JLG Mechanic Service and Maintenance Man-
ual and applicable JLG inspec-
tion form
Frequent Inspection In service for 3 months or 150 hours, whichever comes
first;
or
Out of service for a period of more than 3 months;
or
Purchased used. Owner, Dealer, or
User Qualified JLG Mechanic Service and Maintenance Man-
ual and applicable JLG inspec-
tion form
Annual Machine Inspection Annually, no later than 13 months from the date of
prior inspection. Owner, Dealer, or
User Factory Trained
Service Technician
(Recommended) Service and Maintenance Man-
ual and applicable JLG inspec-
tion form
Preventative Maintenance At intervals as specified in the Service and Mainte-
nance Manual. Owner, Dealer, or
User Qualified JLG Mechanic Service and Maintenance Man-
ual
NOTE: Inspection forms are available from JLG. Refer to Section 6 - Operators Maintenance when performing inspections.