JLG 3246E2 ANSI Parts Manual - Manual (Page 79)

3120738 3-7
SECTION 3 SCISSOR ARMS
S
E
C
T
I
O
N
3
S
C
I
S
S
O
R
A
R
M
S
.
FIGURE 3-2. SCISSOR ARMS INSTALLATION - 1932E2
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
SCISSOR ARMS INSTALLATION - 1932E2 OPTIONS: Ref.
0258014 Standard Machines Ref. M
1 Not Used
2 0100011 Loctite #242 A/R
3 0100019 Loctite #271 A/R
4 0100039 Loctite #411 (Not Shown) (Prior to S/N 50027) A/R
5 0200605 Arm Weldment (Top Outboard) 1
6 0200606 Arm Weldment (Upper Mid Outboard) 1
7 0200607 Arm Weldment (Bottom Outboard) 1
8 0200608 Arm Weldment (Top Inboard) 1
9 0200609 Arm Weldment (Upper Mid Inboard) 1
10 0200610 Arm Weldment (Lower Mid Inboard) 1
11 0200611 Arm Weldment (Bottom Inboard) 1
12 0200614 Arm Weldment (Lower Mid Outboard) 1
13 Bushing Options (Part of Item 16): 4
0440226 Bushing, Excelite (Prior to S/N 50027)
0440229 Bushing, Garmax (S/N 50027 to Present)
14 0561278 Block, Pivot 1
15 0561301 Block, Slide 4
16 Block, Pivot Options (Includes Item 13): 4
Use 0440238 Prior to S/N 62991 (Was p/n 0561312)
0440238 S/N 62991 to Present
17 Bolt Options: A/R
0641404 Bolt 1/4”-20NC x 1/2” (Prior to S/N 50027)
0641405 Bolt 1/4”-20NC x 5/8” (S/N 50027 to Present)
18 Not Used
19 Bolt Options: 8
0681518 Bolt 5/16”-18NC x 2 1/4” (Grade 8) (Prior to S/N 50027)
0630528 Bolt 3/8”-16NC x 2 1/2” (Grade 8) (S/N 50027 to Present)
20 0641536 Bolt 5/16”-18NC x 4 1/2” 4
21 0641606 Bolt 3/8”-16NC x 3/4” (Prior to S/N 111642) 4
22 0692224 Bolt 3/4”-16NF x 3” 1
23 Not Used
24 0902385 Bracket, Platform Attach (Right Side) 1
25 0902386 Bracket, Platform Attach (Left Side) 1
26 Pad, Bumper Options:
0940084 Prior to S/N 50027 (Apply Item #4 to Pad) 6
0940087 S/N 50027 to Present 10
27 Bushing, Excelite Options: 8
0962096 Prior to S/N 50027
0440227 S/N 50027 to Present
28 Bushing, Excelite Options: 32
0962097 Prior to S/N 50027
0440228 S/N 50027 to Present
29 Not Used