JLG 3246E2 ANSI Parts Manual - Manual (Page 129)

3120738 4-31
SECTION 4 PLATFORM
S
E
C
T
I
O
N
4
P
L
A
T
F
O
R
M
FIGURE 4-8. PLATFORM CONSOLE BOX ASSEMBLIES (STANDARD CONTROL MACHINES)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
PLATFORM CONSOLE BOX ASSEMBLIES OPTIONS: Ref.
0258462 Without Tilt Indicators (Built with Relays) Ref. C
0258458 Without Tilt Indicators & With Battery Discharge
Indicator (Built with Relays) Ref. C
With Tilt Indicators (Built with PC Board) Options: Ref.
0258463 (Prior to S/N 112511) Ref. I
0273152 (S/N 112511 to Present) Ref. A
With Tilt Indicators & Battery Discharge Indicator
(Built with PC Board) Options: Ref.
0258459 (Prior to S/N 112511) Ref. I
0273154 (S/N 112511 to Present) Ref. A
With Tilt Indicators & Cut-Out (Built with PC Board)
Options: Ref.
0258464 (Prior to S/N 112511) Ref. I
0273152 (S/N 112511 to Present) Ref. A
With Tilt Indicators, Cut-Out & Battery Discharge
Indicator (Built with PC Board) Ref.
0258460 (Prior to S/N 112511) Ref. H
0273154 (S/N 112511 to Present) Ref. A
NOTE: SHOULD A NEW CONSOLE BOX HAVE BEEN
ORDERED FOR A MACHINE BUILT PRIOR TO S/N
71662, REPLACEMENT BOX WOULD HAVE THE PC
BOARD INSTEAD OF THE RELAYS. IDENTIFY CON-
FIGURATION BEFORE ORDERING REPAIR PARTS. Ref.
1 Alarm Options: A/R
Not Required Without Tilt Indicators 0
0140011 With Tilt Indicator 1
2 0641404 Bolt 1/4”-20NC x 1/2” 4
3 Box, Platform 1
0861147 Without Tilt Indicators
0861174 With Tilt Indicator
4 Cable, Lanyard Options: 1
Use 1060329 Prior to S/N 111924 (Was P/N 1060492)
1060329 S/N 111924 to Present
5 Controller Assembly Options
(See Figure 4-9 for Breakdown): 1
1600268 Prior to S/N 59220
1600295 S/N 59220 to Present
6 1703803 Decal - Relay Function (Prior to S/N 71662 Only) 1
7 Use 2420201 Gauge, Battery Discharge Indicator (Was
2420186) (Optional - When Equipped) 1
8 Lamp, Indicator Options: A/R
Not Required Without Tilt Indicators 0
2920026 With Tilt Indicators 1
9 Bulb, Light Options: A/R
Not Required Without Tilt Indicators 0
2920094 With Tilt Indicators 1