JLG 41AM Operator Manual - Manual (Page 26)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
2-6 – JLG Lift – 3121211
4. Base Frame - Components properly secured, no loose
wires dangling below base; bubble level in place and
functioning properly.
5. Tilt Back Assembly - (36AM/41AM Models Only) Prop-
erly secured; no parts missing i.e.. safety pins, gas
spring cylinder(s), caster wheels, etc.
6. Battery/Charger Box Assembly - (DC Voltage
Machines) Proper battery electrolyte level, no cable
corrosion. Battery box pivots freely when machine is
tilted for transporting (36AM/41AM Models Only).
7. Outrigger Interlock Indicator LED’s - See note
above.
8. Outrigger Sockets - Outrigger lock/release pins in
place and secure, no visible damage. Outrigger inter-
lock contacts (inside outrigger sockets) secure and
clean.
9. Outrigger Beams - Outrigger interlock contacts prop-
erly installed and clean (on bottom of outrigger
assembly). Leveling jacks secure to the outrigger
assembly, lubricated and functioning properly.
10. Motor/Pump/Reservoir Power Unit - No evidence of
hydraulic leaks. Check that hydraulic reservoir fluid
level is filled to the "Fill to Line" mark on the side of the
reservoir.
11. Manual Release Control Valve - See note above.
12. Ground Controls - Key switch operable, placards
secure and legible; emergency stop switch, properly
set for operation.
13. Mast Assembly - Inspect mast chains or cables as per
note above.
14. Platform Rail Installation - Entry gate/bar in proper
working order.
15. Platform Assembly - Secure to mast; Control and
power cables properly tensioned and seated in control
cable sheaves; control cable sheaves rotate freely.
16. Platform Controls - Placards secure and legible,
emergency shut-off button set for operation. Opera-
tors manual enclosed in manual storage tube.