JLG 41AM Operator Manual - Manual (Page 11)

SECTION 1 - SAFETY PRECAUTIONS
3121211 – JLG Lift – 1-1
SECTION 1. SAFETY PRECAUTIONS
1.1 GENERAL
This section outlines the necessary precautions for proper and
safe machine operation and maintenance. For proper machine
use, it is mandatory that a daily routine is established based on
the content of this manual. A maintenance program using the
information provided in this manual and the Service and Main-
tenance Manual must also be established by a qualified person
and followed to ensure that the machine is safe to operate.
The owner/user/operator/lessor/lessee of the machine should
not operate the machine until this manual has been read, train-
ing is accomplished, and operation of the machine has been
completed under the supervision of an experienced and quali-
fied operator. If there is a question with regard to safety training,
inspection, maintenance and operation, please contact JLG
Industries, Inc. ("JLG").
MODIFICATION OR ALTERATION OF AN AERIAL WORK PLATFORM SHALL BE
MADE ONLY WITH PRIOR WRITTEN PERMISSION FROM THE MANUFACTURER.
1.2 TRANSPORTING
FAILURE TO COMPLY WITH SAFETY PRECAUTIONS LISTED IN THIS SECTION
AND ON MACHINE MAY RESULT IN MACHINE DAMAGE, PERSONNEL INJURY
OR DEATH AND IS A SAFETY VIOLATION.
Transport
• The platform must be completely empty of tools and
debris.
• Ensure platform is fully lowered. Remove and stow outrig-
gers.
• Never allow personnel in platform while moving machine.
• To move machine use handles provided on the mast cross-
bar.