Inspection and maintenance table -3 – JLG 41AM Operator Manual User Manual
Page 23

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
3121211
– JLG Lift –
2-3
Table 2-1. Inspection and Maintenance Table
TYPE
FREQUENCY
PRIMARY
RESPONSIBILITY
SERVICE
QUALIFICATION
REFERENCE
Pre-Start
Inspection
Before using each day; or whenever there’s an Operator
change.
User or Operator
User or Operator
Operator and Safety Manual
Pre-Delivery Inspec-
tion
(See Note Below)
Before each sale, lease, or rental delivery.
Owner, Dealer, or User
Qualified JLG Mechanic
Service and Maintenance Manual
and applicable JLG inspection
form
Frequent
Inspection
In service for 3 months or 150 hours, whichever comes
first; or Out of service for a period of more than 3
months; or Purchased used.
Owner, Dealer, or User
Qualified JLG Mechanic
Service and Maintenance Manual
and applicable JLG inspection
form
Annual Machine
Inspection
Annually, no later than 13 months from the date of prior
inspection.
Owner, Dealer, or User
Factory-Trained
Service Technician
(Recommended)
Service and Maintenance Manual
and applicable JLG inspection
form
Preventative
Maintenance
At intervals as specified in the Service and Maintenance
Manual.
Owner, Dealer, or User
Qualified JLG Mechanic
Service and Maintenance Manual
NOTE:
Inspection forms are available from JLG. Use the Service and Maintenance Manual to perform inspections.