JLG 4017PS Operator Manual - Manual (Page 140)

Section 5 - Attachments and Hitches
5-48 31200753
Platform
Use Platform Load Chart
To determine maximum capacity, refer to capacity decal on
platform.
The joystick (1) controls movement of the boom.
The attachment tilt roller switch (2) controls platform tilt.
• Push roller switch down to tilt up.
• Push roller switch up to tilt down.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-11.
Operation from Cab
• The platform is to be only used on machines specifically designed to accept the
platform. Refer to the Platform Operation & Safety Manual.
• Machine travel is limited to first gear.
• Function speeds are reduced.
• Boom can only be raised up to 10 degrees.
OZ2870
OZ3850
1
2