JLG 4017PS Operator Manual - Manual (Page 105)

Section 5 - Attachments and Hitches
5-13 31200753
Hydraulic Quick Attach
This installation procedure is designed for one-person operation.
1. Tilt quick attach forward to provide clearance.
Check to be sure lock pin is disengaged.
2. Align attachment pin with recess in attachment.
Raise boom slightly to engage attachment pin in
recess.
3. Tilt quick attach back to engage attachment.
4. Press and hold button (1) and at the
same time push roller switch down (2) to
engage lock pin or push roller switch up
to disengage lock pin.
5. Raise boom to eye level and visually
check that the lock pin protrudes through
the hole. If the pin does not protrude
through the hole, place the attachment on
the ground and return to step 2.
6. If attachment is equipped, connect auxiliary hydraulic hoses. See “Hydraulic
Operated Attachment” on page 5-22.
OB0220
OB0230
OB0240
2
1
OB0250
OAL1930
ENGAGED DISENGAGED