JLG 4017PS Operator Manual - Manual (Page 119)

Section 5 - Attachments and Hitches
5-27 31200753
To Side Shift:
The attachment auxiliary hydraulic roller switch (3) controls side shift.
• Push roller switch down to shift forks left.
• Push roller switch up to shift forks right.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-11.
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could
damage forks or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
WARNING
CRUSH HAZARD. Do not use side shift to push or pull objects or load. Failure to
comply could cause object or load to fall.