JLG 4017PS Operator Manual - Manual (Page 101)

Section 5 - Attachments and Hitches
5-9 31200753
To identify the proper capacity chart on telehandlers equipped with outriggers, refer
to the following icons which may be located on the capacity chart.
• Use when lifting a load with outriggers up.
• Use when lifting a load with outriggers down.
WARNING
TIP OVER HAZARD. All loads shown on rated capacity chart are based on
machine being on firm ground with frame level (see page 4-5); the forks being
positioned evenly on carriage; the load being centered on forks; proper size tires
being properly inflated; and the telehandler being in good operating condition.
OAL1090
OAL1100