JLG X17J Operator Manual User Manual
Page 95

The message disappears when the lever is released.
6.5.2 O
PERATING THE MACHINE FROM THE EMERGENCY CONTROL POSITION ON THE GROUND IF THE
OPERATOR IS TAKEN ILL
This emergency descent function can be used only if:
‑ the operator in the basket is taken ill.
The sole purpose of the emergency descent from the ground is to aid the operator or opera‑
tors in the basket by bringing them to the ground, all other uses are prohibited.
To perform the emergency descent in the conditions described above, proceed as follows:
a) Move the control distributor selection switch from the distributor in the basket to the
distributor on the ground.
b) If necessary, start the engine using the corresponding button.
c)
Move the aerial part of the machine using the manual levers positioned on the distri‑
butor on the ground as described on the sticker placed near them and as specified in
this manual, until the basket carrying the operator reaches the ground.
X17JR0420113
BOOM LIFT MODELS X17J
JLG
91
IMPORTANTE
IMPORTANT
- 120HX Service Manual (116 pages)
- 544D-10 Parts Manual (730 pages)
- 100SX Parts Manual (224 pages)
- 450A Operator Manual (68 pages)
- 15DVL (3121839) Parts Manual (126 pages)
- E450 Operator Manual (116 pages)
- E450 Operator Manual (106 pages)
- G5-18A Operator Manual (142 pages)
- 2505H Operator Manual (148 pages)
- 40HA ANSI Parts Manual (322 pages)
- 400RTS Service Manual (100 pages)
- 660SJ Parts Manual (306 pages)
- 660SJ Parts Manual (382 pages)
- 660SJ Parts Manual (352 pages)
- 660SJ Parts Manual (310 pages)
- 600S_SJ Parts Manual (299 pages)
- 600S_SJ Parts Manual (302 pages)
- 660SJ Parts Manual (404 pages)
- 19AMI (3120758) Service Manual (68 pages)
- 400RTS ANSI Service Manual (98 pages)
- 500RTS ANSI Service Manual (80 pages)
- LSS Scissors (78 pages)
- 510AJ Series II Operator Manual (104 pages)
- 800S Operator Manual (158 pages)
- 800S Operator Manual (130 pages)
- 35xxPS Operator Manual (176 pages)
- 400RTS ANSI Operator Manual (48 pages)
- 500RTS ANSI Operator Manual (46 pages)
- 800A_AJ Operator Manual (150 pages)
- 800A_AJ Operator Manual (134 pages)
- 266 Operator Manual (140 pages)
- G9-43A Parts Manual (788 pages)
- G6-42A Parts Manual (478 pages)
- M400AJP Narrow (108 pages)
- E400 Operator Manual (118 pages)
- 80HX_HX+6 ANSI Operator Manual (104 pages)
- 1350SJP Quick Reference Guide (1 page)
- 1350SJP Quick Reference Guide (2 pages)
- 15VPSP (3120798) Parts Manual (98 pages)
- X14J Operator Manual (169 pages)
- 400S ANSI Service Manual (464 pages)
- X17J Plus Operator Manual (176 pages)
- 20AM Operator Manual (98 pages)
- 3369LE Operator Manual (86 pages)
- 3369LE Operator Manual (84 pages)