JLG X17J Operator Manual User Manual

Page 17

. D

ESCRIPTION

LEVER DIRECTION

MOVEMENT OBTAINED

ICTOGRAM NEAR THE

CONTROL

Rotation lever
This lever allows the operator to rotate
the aerial part of the platform around the
axis of the turntable.
The alignment of the machine is indica‑
ted in pos. 6 of the radio control display
(paragraph 4.1).

lever fowards:
rotates the aerial
part counter‑
clockwise

lever backwards:
rotates the aerial
part clockwise

First and second arm control lever
This lever allows the operator to raise or
lower the first and the second arm of the
platform.
The synchronous movement of first and
second arm always ensures the maxi‑
mum outreach during work and is obtai‑
ned thanks to the special configuration
of the system, in fact it does not depend
on the operator’s ability.

lever fowards:
moves first and
second arm synch‑
ronously upwards

lever backwards:
moves first and
second arm synch‑
ronously
downwards

Third arm control lever

This lever allows the operator to raise or
lower the third arm of the platform.

lever fowards:
raises the third arm

lever backwards:
lowers the third arm

Extension arm control lever

This lever allows the operator to extend and
retract the extension arm.

lever fowards:
extends the arm
outwards
lever backwards:
retracts the exten‑
sion arm toward the
machine

Jib control lever

This lever allows the operator to raise and
lower the jib arm.

lever fowards:
raises the jib arm

lever backwards:
lowers the jib arm

X17JR0420113

BOOM LIFT MODELS X17J

JLG