JLG X17J Operator Manual - Manual (Page 19)

LOWERING AND RAISING THE STABILISERS
The stabilisers must be lowered and raised only from the control position in the basket, with
the radio control positioned in its seat.
After leaving the control position in the basket, always remember to close the radio con‑
trol protection cover and to fold the ladder
To perform any movement, for aerial part or carriage part, from the control position inside
the basket the footswitch must be pushed (the footswitch must be release and pressed again
if no movements are made for more of 7 second)
2.1.3 MACHINE IDENTIFICATION PLATE
The rating plate is located on the front of the machine, on the electric motor protection guard
(see photo).
The drawing is shown below.
Manufactured by
HINOWA S.p.A.
Via Fontana
37054 NOGARA (VR)
ITALY
Model
Date of manufacture
G.V.W. (Dry)
Serial number
JLG Industries. Inc - McConnellsburg. PA - USA
kg
kg
MAXIMUM ALLOWABLE OPERATING INCLINATION
M/S
M/S
kg
kg
kg
kg
= +
12.5
12.5
200
120
2x80
1x80
40
40 N
N 400
200
MAX
MAX
07041700
kg
1°
X17JR0420113
BOOM LIFT MODELS X17J
JLG
15