JLG X17J Operator Manual User Manual

Page 77

‑

Make sure that all the emergency STOP buttons are released; This can be seen on the
radio control display by checking the corresponding icon is not shown in position 7. If
the operator attempts to start with an emergency stop button not released, the display
will show an error message when the start button is pressed.

‑

If the operator attempts to start one of the two motors while the other is already run‑
ning, starting will be impossible and the icon showing the motor already on will appear
at the centre.

‑

Use the button on the radio control to start the motor.

THE ENGINE MUST BE STARTED WITH ALL THE CONTROL BUTTONS AND JOY‑
STICKS IN NEUTRAL POSITION.
Always make sure there are no foreign objects (e.g. branches) that may accidentally operate a
control, as the platform may move suddenly out of the operator’s control and cause serious
harm to things and/or people.
Make sure that all the manual controls for the proportional valves are at rest.

X17JR0420113

BOOM LIFT MODELS X17J

JLG