JLG X17J Operator Manual - Manual (Page 147)

143
8 SAFETY STANDARDS FOR TRANSPORT
Always make sure that the vehicle used to transport the platform has suitable capacity and
that no part of the EWP protrudes from the size limits prescribed by the road traffic regula‑
tions.
DURING TRANSPORT, COVER THE RADIO CONTROL WITH THE SPECIAL PRO‑
TECTION CASING PROVIDED, OR DISCONNECT IT AND STORE IT IN A SAFE
PLACE.
8.1 R EMOVING THE BASKET
The basket can only be removed to allow transit through openings measuring between 1500
and 990 mm.
I F THE MACHINE IS WITHOUT BASKET , ONLY THE TRACKS CAN BE MOVED , KEEPING AT A MINIUM
DISTANCE OF
1
METRE FROM THE MACHINE
.
To remove the basket, proceed as follows:
‑ remove the radio control from the support;
‑ loosen the aluminium covers on the basket fixing pins (see photo);
‑ withdraw the basket from above.
Reassemble the basket as follows:
‑ fit the basket into the fixing pins on the basket support, making sure that it moves
downwards as parallel to the basket support as possible.
‑ Tighten the two aluminium covers.
BOOM LIFT MODELS X17J
JLG
X17JR0420113
IMPORTANTE IMPORTANT