Eppendorf BioPhotometer Data Transfer - Manual (Page 24)

6 Operation
24
BioPhotometer Data Transfer Software — Operating Manual
6.9 Create and open archives
With the Data Transfer Software measurements can be archived. Transferred measurement data
is automatically saved in table format in the current archive file.
Closed archive files can be opened in the Archive area. The measurement data can be exported
and printed.
6.9.1 Create archive file
You can create new archive files in regular intervals.
The preset archive file is ResultData. You can rename the file before recording measurement
data for the first time.
Proceed as follows:
1. Select New Archive file in the Menu Archive.
The following dialog window opens:
2. Check the default path.
3. Enter a file name. The file type is XML and cannot be changed.
4. Confirm your entries with Save.
The dialog window is closed. The assigned name for the current archive file is shown in Archive
file in the information field of the Work area.
Hint!
If a new archive file is created the previously used file is closed. You cannot save in closed files. If
you do not choose a different path, the newly created file is automatically saved onto the hard
drive under Programs/Eppendorf/BioPhotometer.
Hint!
Make sure that the ending of the file name is .xml. Entering a file name without this ending is not
accepted.
6
Operation