Eppendorf BioPhotometer Data Transfer - Manual (Page 10)

6 Operation
BioPhotometer Data Transfer Software — Operating Manual
10
6 Operation
6.1 Work area
The Work area is divided into various sections:
Abb. 1: Work area
Fig. 1: Work area
1 Method List
Contains all transferred methods after starting the
software.
2 File information
Archive file: name of the current archive file where the
recorded measurement data is saved.
Measurement ID: Identification code under which the
transferred measurement data are filed. The entry is
optional.
3 Data Output
Display of the data parallel to the measurement
procedure at the BioPhotometer plus. The display and
order of the data corresponds to the display of the
BioPhotometer plus and the corresponding device
print.
4 Samples
Display of the data in table format parallel to the
measurement procedure at the BioPhotometer plus.
The data does not differ as regards to contents form
Data Output. The order of the data corresponds to the
display of BioPhotometer plus.
5 Calibrations
Display of the calibration data in table format. This
area only appears if data with calibration was
transferred.
6
Operation