Eppendorf S Series 48S CO2 Incubator User Manual

Page 22

CO48S-0050

Galaxy S Series 48 S Personal Size CO

Incubator

User’s Guide

3.7 Programming the Alarm System

3.7.1

Setting High & Low Temperature Alarms

1. Press the

enter & T keys simultaneously to enter the alarm menu. The

display will show

°C

2. Press the

enter key to display the High Temperature Alarm,

HI 37

. The

factory setting is the setpoint value (37.0ºC) + 0.5

°C.

3. If you wish to adjust the High Temperature Alarm, use the S or T key.

The minimum setting, however, is 0.5

°C from setpoint.

4. Press the

enter key to save the setting, whether or not you have changed it.

Now the Low Temperature Alarm is displayed,

LO 36

. The factory

setting is the setpoint value (37.0ºC) - 0.5

°C.

5. Use the S or T key if you wish to adjust the value.
6. Press the

enter key to accept the setting, whether or not you have changed

it.

3.7.2

Setting the CO

High & Low Alarms

1. While you are still in the alarm menu (see Step 1 of Section 3.7.1 above),

press the S

key. The display will show

CO2 AL

2. Press the

enter key to display

. The factory setting is the setpoint

value (5.0%) + 0.5%.

3. If you wish to adjust the High CO

Alarm, use the S or T key. The

minimum setting, however, is 0.5

°C from setpoint.

4. Press the

enter key to save the setting, whether or not you have changed it.

Now the Low CO

Alarm is displayed,

LO 4

. The factory setting is the

setpoint value (5.0%) - 0.5%.

5. Use the S or T key if you wish to adjust the value.
6. Press the

enter key to accept the setting, whether or not you have changed

it.

3.7.3

Door Open Alarm

When you open the door, an alarm will sound after a preset time delay. If you
wish to adjust the time delay:

1. In the alarm menu (see Step 1 of Section 3.7.1 above), press the S

key, the

display will show

doo r

(reading across both displays).

2. Press the

enter key and the S & T keys to adjust the time (as you scroll

through the available choices, you will see

seconds,

then

OFF