3o o – Eppendorf S Series 48S CO2 Incubator User Manual
Page 17
17
New Brunswick Scientific
User’s Guide
3
3
O
O
P
P
E
E
R
R
A
A
T
T
I
I
O
O
N
N
3.1 Control
Panel
The control panel consists of two LCD displays and four function keys (see Figure 5):
Figure 5: Control Panel
1 Temperature
display
2
CO
2
display
3
Function keys
Table 3: Function Keys
Key Symbol
Key Name
Function
¤
Programming
Press this key to enter Programming mode, and to
set values in either display. Press this key
simultaneously with the Enter key to perform
AutoZero.
T
Down
In Programming mode, use this key to scroll down
through numbered values in the display. Press this
key simultaneously with the Enter key to work in
the Alarm system.
S
Up
In Programming mode, use this key to scroll up
through numbered values in the display.
enter
Enter
Press this key to save a new setpoint. Press this
key simultaneously with the Programming key to
perform AutoZero. Press this key simultaneously
with the Down key to work in the Alarm system.
NOTE:
If you accidentally press both the Up and Down keys simultaneously, you
will engage Engineering Mode: immediately press the Programming key
(
¤) to exit.
2
1
3