Eppendorf ThermoStat plus - Manual (Page 15)

5 Operation
17
ThermoStat plus — Operating Manual
5.2 Inserting exchangeable thermoblocks
The following exchangeable thermoblocks can be set on the ThermoStat plus:
WARNING!
Warning! Contamination due to opening tube lids.
In the following cases, the lids of PCR tubes can spring open and the sample material
can escape:
•
high vapor pressure of the content
•
improperly sealed lid
•
damaged sealing lip
 Always check that micro test tubes have been sealed tightly before use.
Exchangeable thermoblock 0.5: 24 x 0.5 ml micro test tubes
Exchangeable thermoblock 1.5: 24 x 1.5 ml micro test tubes
Exchangeable thermoblock 2.0: 24 x 2.0 ml micro test tubes
Exchangeable thermoblock Cryo: 24 x 1.5 or 2.0 ml Cryo tubes
Exchangeable thermoblock lab tubes: 24 tubes at 11 – 11.9 mm, height 30 to 76 mm
Exchangeable thermoblock 15 ml Falcon: 8 x 15 ml Falcon tubes
Exchangeable thermoblock 50 ml Falcon: 4 x 50 ml Falcon tubes
Exchangeable thermoblock MTP: MTP and DWP, PCR tubes and plates
Exchangeable thermoblock slides: 4 slides
Exchangeable thermoblock slides DC: 4 slides DC
CombiBox
Hint!
To insert the exchangeable thermoblocks, use the accessories supplied (e.g. screw
driver, screws, flat washers and lock washers).
EN
Operating Manual