Eppendorf Top Buret M / H - Manual (Page 36)

36
Technical data
Top Buret
™
English (EN)
9 Technical data
9.1 Ambient conditions
9.2 Errors
9.3 Parameters for titratable media
9.4 Conditions for calibration
Test conditions and test evaluation in accordance with ISO 8655, part 6. Test
with analytical balance with evaporation protection, approved by the board of
weights and measures.
The errors were determined under the following conditions:
Ambience Only for use in indoors.
Ambient temperature 15 °C – 40°C
Relative humidity 0 % – 90 %, non-condensing.
Atmospheric pressure Use up to a height of 2000 m 
above sea level.
Model Testing volume Inaccuracy Imprecision
Top Buret M 25 mL ±0.2% ≤ 0.1 %
Top Buret H 50 mL ±0.2% ≤ 0.1 %
Medium temperature 15 °C – 40°C
Maximum density 2.2 g/cm 3
Maximum vapor pressure 50 kPa
Liquid Water according to ISO 3696
Number of determinations 10
Ambient temperature 20 °C – 25°C ± 0.5 °C
Dispensing liquid Dispensing on the tube inner wall