Eppendorf Top Buret M / H - Manual (Page 20)

20
Installation
Top Buret
™
English (EN)
The Top Buret can be directly screwed onto bottles with a GL 45 thread. The
adapters from the delivery package (see p. 9) and the accessories available for
ordering (see p. 37) allow the use on bottles with other threads.
Prerequisites
• The device has been mounted (see p. 15)
• The telescopic aspirating tube has been attached (see p. 18)
• The length of the telescopic aspirating tube has been adjusted to the length of
the bottle.
Proceed as follows:
CAUTION! Personal injury due to contact with reagents.
Contact with reagents may be harmful to eyes or skin.
 Wear personal protective equipment.
 Make sure that no reagents are leaking from the buret.
Abb. 4-4: Screwing the Top Buret onto the bottle
Fig. 4-4: Screwing the Top Buret
onto the bottle
1. If the bottle has a different thread to
the Top Buret, use the appropriate
adapter.
2. Rotate the discharge valve toggle to
deairing.
3. Attach the Top Buret onto the bottle
from above.
4. If necessary, correct the length of
the telescopic aspirating tube.
5. Screw the Top Buret onto the bottle.