7 setting the injection mode, 1 setting the automatic injection mode, 2 setting the manual injection mode – Eppendorf FemtoJet 4x v.2 User Manual
Page 32: 8 injecting liquid, 1 automatically injecting liquid, Setting the injection mode 6.7.1, Setting the automatic injection mode, Setting the manual injection mode, Injecting liquid 6.8.1, Automatically injecting liquid
Operation
FemtoJet
®
4x
English (EN)
32
6.7
Setting the injection mode
6.7.1
Setting the automatic injection mode
During the automatic injection mode, the set injection time is used. During the injection,
the time elapses in reverse and the injection stops at zero.
6.7.2
Setting the manual injection mode
During the manual injection mode, no preset injection time is used. The injection only
stops when releasing the
inject
key.
6.8
Injecting liquid
You can trigger an injection with the
inject
key, the foot control or the hand control.
6.8.1
Automatically injecting liquid
Prerequisites
• The display shows
Auto
.
• The injection parameters are set.
• The micromanipulator is connected.
• For the synchronization,
IMMEDIATE
is set on the micromanipulator.
Press the
auto man
key.
The
Auto
injection mode is displayed.
The injection time is displayed.
Press the
auto man
key.
The
Manual
injection mode is displayed.
The injection time only is displayed
when pressing the
inject
key.