Eppendorf FemtoJet 4x v.2 - Manual (Page 26)

Software
FemtoJet
® 4x
English (EN)
26
5.2 Main menu
Abb. 5-2:Main menu
Fig. 5-2: Main menu
5.3 Navigating the menu
5.3.1 Selecting the menu and navigating
5.3.2 Exiting the menu
1. Select the submenu Back .
2. Press the menu enter key.
The main screen appears.
Menu Parameter
Change capillary Replace the capillary
Pressure unit Set the unit for pressure (hPa or PSI)
Beeper Switch on/off the signal tone
Contrast Set the display contrast
Illumination Switch on/off the display illumination
Continuous flow Set a fixed value for a continuous pressure
1. Press the menu enter key.
The menu appears.
2. To select a menu entry, press the arrow
key.
The menu entry is shown with a black
bar.
Back
Change capillary
Pressure unit
Beeper
Contrast
Illumination
Continuous flow
Back
Change capillary
Pressure unit
Beeper
Contrast
Illumination
Continuous flow